Course Agenda

Management

Les principes du E-Marketing
13.03.2012, Neuchâtel (CH), FSRM

Initiation à la sécurité et à la directive MSST
14.03.2012, Neuchâtel (CH), FSRM

Réaliser des communications percutantes
15.03.2012, Neuchâtel (CH), FSRM

Materialbearbeitung mit Laser
21.03.2012, Dübendorf EMPA Akademie

Gestion du temps, organisation du travail quotidien
22.03.2012, Neuchâtel (CH), FSRM

Facteur humain dans la gestion de projet
23.03.2012, Neuchâtel (CH), FSRM

Captiver son auditoire
25.04.2012, Neuchâtel (CH), FSRM

Problèmes - résolution avec une méthode (8D)
26.04.2012, Neuchâtel (CH), FSRM

Mieux gérer son stress et augmenter son efficacité
13.06.2012, Neuchâtel (CH), FSRM

Leadership – Être chef de projet
15.06.2012, Neuchâtel (CH), FSRM

Formateurs occasionnels
18.06.2012, Neuchâtel (CH), FSRM

Approche systématique pour la R&D
  »  This course is currently not scheduled. Please contact us if you are interested.

Assurances et PME : Optimiser les coûts et éviter les doublons
  »  This course is currently not scheduled. Please contact us if you are interested.

Bilan énergétique
  »  This course is currently not scheduled. Please contact us if you are interested.

Business plan produit: comment le présenter, le construire et assurer son efficacité
  »  This course is currently not scheduled. Please contact us if you are interested.

Calcul de coût de revient et comptabilité de gestion
  »  This course is currently not scheduled. Please contact us if you are interested.

Comment mettre la GPAO au service de la R & D ?
  »  This course is currently not scheduled. Please contact us if you are interested.

Comprendre le système des brevets pour mieux l'utiliser
  »  This course is currently not scheduled. Please contact us if you are interested.

Comprendre les comptes d'une entreprise
  »  This course is currently not scheduled. Please contact us if you are interested.

Comprendre un rapport de gestion
  »  This course is currently not scheduled. Please contact us if you are interested.

Concepts et pratiques modernes du marketing
  »  This course is currently not scheduled. Please contact us if you are interested.

Concevoir et réaliser des présentations en public
  »  This course is currently not scheduled. Please contact us if you are interested.

Conclusion des contrats en droit suisse
  »  This course is currently not scheduled. Please contact us if you are interested.

Contact avec les médias: comment se préparer
  »  This course is currently not scheduled. Please contact us if you are interested.

Développement durable et PME : Préparer votre entreprise aux nouveaux défis environnementaux
  »  This course is currently not scheduled. Please contact us if you are interested.

Etudes de marché
  »  This course is currently not scheduled. Please contact us if you are interested.

Gestion de la créativité et innovation
  »  This course is currently not scheduled. Please contact us if you are interested.

La gestion des marques et de l’image de marque
  »  This course is currently not scheduled. Please contact us if you are interested.

La théorie des contraintes
Une approche d’optimisation des performances
  »  This course is currently not scheduled. Please contact us if you are interested.

Le contrat de travail en droit suisse
  »  This course is currently not scheduled. Please contact us if you are interested.

Le data mining dans l'industrie: optimiser la qualité et réduire jusqu'à 30% des rebuts
  »  This course is currently not scheduled. Please contact us if you are interested.

Lecture et interprétation des certificats de conformité ce, la déclaration de conformité et le marquage sur l’emballage du produit
  »  This course is currently not scheduled. Please contact us if you are interested.

Marques et designs:des capitaux pour l’entreprise
  »  This course is currently not scheduled. Please contact us if you are interested.

Mise en place d'un dispositif de veille dans l'entreprise
  »  This course is currently not scheduled. Please contact us if you are interested.

Négociation d’affaires: Quels dispositifs pour réussir ?
  »  This course is currently not scheduled. Please contact us if you are interested.

Ordonnancement de la production
  »  This course is currently not scheduled. Please contact us if you are interested.

Outils et méthodes de hacking
  »  This course is currently not scheduled. Please contact us if you are interested.

Préparation à la certification en management de projet (IPMA ou PMI)
  »  This course is currently not scheduled. Please contact us if you are interested.

Projets, organisation (objectifs, délais, budget)
  »  This course is currently not scheduled. Please contact us if you are interested.

Réaliser des visuels percutants pour renforcer le discours
  »  This course is currently not scheduled. Please contact us if you are interested.

Recherche efficace et pertinente sur Internet
  »  This course is currently not scheduled. Please contact us if you are interested.

Savoir présenter un dossier d’investissement
  »  This course is currently not scheduled. Please contact us if you are interested.

Sécurité du système d’information
  »  This course is currently not scheduled. Please contact us if you are interested.

Securité sous Windows 7/2008
  »  This course is currently not scheduled. Please contact us if you are interested.

Six Sigma : Outils et méthodes simplifiées pour une approche efficace
  »  This course is currently not scheduled. Please contact us if you are interested.

Transmission, succession d'entreprise
  »  This course is currently not scheduled. Please contact us if you are interested.

Product Development / Innovation

Critères pour le choix d'un moteur électrique
28.02.2012, Neuchâtel (CH), FSRM

Conception de systèmes mécaniques: Statique
07.03.2012, Neuchâtel (CH), FSRM

Conception de systèmes mécaniques: Dynamique
03.04.2012, Neuchâtel (CH), FSRM

Design et réalité industrielle
03.05.2012, Neuchâtel (CH), FSRM

Conception de systèmes mécaniques: Dimensionnement
31.05.2012, Neuchâtel (CH), FSRM

Conception de systèmes optiques
22.06.2012, Neuchâtel (CH), FSRM

AMDEC - Analyse des Modes de Défaillance, de leurs Effets et de leur Criticité
  »  This course is currently not scheduled. Please contact us if you are interested.

Analyse du produit et son re-design
  »  This course is currently not scheduled. Please contact us if you are interested.

Business plan produit: comment le présenter, le construire et assurer son efficacité
  »  This course is currently not scheduled. Please contact us if you are interested.

Comment mettre la GPAO au service de la R & D ?
  »  This course is currently not scheduled. Please contact us if you are interested.

Compliant Mechanisms for High-Precision Positioning
  »  This course is currently not scheduled. Please contact us if you are interested.

Conception de produits
  »  This course is currently not scheduled. Please contact us if you are interested.

Conception des guidages flexibles
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours tout public: La montre mécanique
  »  This course is currently not scheduled. Please contact us if you are interested.

Ergonomie de conception des produits industriels ou grand public
  »  This course is currently not scheduled. Please contact us if you are interested.

Identification Sans Contact : Techniques et Applications « low-cost »
  »  This course is currently not scheduled. Please contact us if you are interested.

Interface homme-machine : Impact et techniques
  »  This course is currently not scheduled. Please contact us if you are interested.

Introduction à la mécanique vibratoire et au réglage
  »  This course is currently not scheduled. Please contact us if you are interested.

La montre mécanique
  »  This course is currently not scheduled. Please contact us if you are interested.

Le ressort de barillet: son fonctionnement, ses propriétés remarquables, ses limites
  »  This course is currently not scheduled. Please contact us if you are interested.

Les compétences pour l'innovation
  »  This course is currently not scheduled. Please contact us if you are interested.

Méthode QFD: des attentes des clients à la conception de nouveaux produits
  »  This course is currently not scheduled. Please contact us if you are interested.

Piles et accumulateurs: le bon choix
  »  This course is currently not scheduled. Please contact us if you are interested.

Plans d'expériences - Méthode Taguchi
  »  This course is currently not scheduled. Please contact us if you are interested.

Régulation des systèmes mécaniques rapides de haute précision
  »  This course is currently not scheduled. Please contact us if you are interested.

Réseaux de capteurs et transmission de données sans fil
  »  This course is currently not scheduled. Please contact us if you are interested.

Technique for new product development
  »  This course is currently not scheduled. Please contact us if you are interested.

Tolérancement des assemblages: revoir la conception
  »  This course is currently not scheduled. Please contact us if you are interested.

Standards / Quality / Environment

Traitement des eaux résiduaires industrielles
08.02.2012, Neuchâtel (CH), FSRM

Maîtrise de la métrologie dimensionnelle
21.02.2012 - 22.02.2012, Neuchâtel (CH), FSRM

Initiation à la sécurité et à la directive MSST
14.03.2012, Neuchâtel (CH), FSRM

Reliability and Test
26.03.2012 - 27.03.2012, Zürich, Technopark

Nettoyage et dégraissage de pièces dans l'industrie
17.04.2012, Neuchâtel (CH), FSRM

Toxicité des substances chimiques (REACH)
15.05.2012, Neuchâtel (CH), FSRM

Salles propres et environnements apparentés
23.05.2012, Neuchâtel (CH), FSRM

Organisations logistiques client/fournisseurs
14.06.2012, Neuchâtel (CH), FSRM

Bilan énergétique
  »  This course is currently not scheduled. Please contact us if you are interested.

La planification avancée de la qualité (APQP) selon ISO TS 16949:2002
  »  This course is currently not scheduled. Please contact us if you are interested.

Le marquage CE selon la nouvelle approche suite à la décision du Parlement Européen 768/2008/CE
  »  This course is currently not scheduled. Please contact us if you are interested.

Les systèmes de vision dans le contrôle de qualité
  »  This course is currently not scheduled. Please contact us if you are interested.

Mettre les normes ISO 9001 et 14001 au service de son produit
  »  This course is currently not scheduled. Please contact us if you are interested.

Mise en conformité en compatibilité électromagnétique (CEM)
  »  This course is currently not scheduled. Please contact us if you are interested.

Sécurité des appareils : une priorité pour les concepteurs
  »  This course is currently not scheduled. Please contact us if you are interested.

Swiss Made et Contrefaçons
  »  This course is currently not scheduled. Please contact us if you are interested.

Micro and Nanotechnologies

Energy Harvesting
23.02.2012, Freiburg, Germany

Basic Introduction to CMOS Image Sensors
01.03.2012 - 02.03.2012, Lausanne, Switzerland

Conception de systèmes mécaniques: Statique
07.03.2012, Neuchâtel (CH), FSRM

Smart Materials in Robotics and Microtechnology
12.03.2012 - 13.03.2012, Lausanne, Switzerland

Reliability and Test
26.03.2012 - 27.03.2012, Zürich, Technopark

Aluminiumlegierungen
28.03.2012, Dübendorf, EMPA Akademie

Wafer Bonding
29.03.2012 - 30.03.2012, AML at Didcot near Oxford, England

Conception de systèmes mécaniques: Dynamique
03.04.2012, Neuchâtel (CH), FSRM

Polymer Microfabrication (2 days)
17.04.2012 - 18.04.2012, Karlsruhe, Germany

Labs-on-Chip Technologies: Basics and Applications
21.05.2012 - 22.05.2012, Barcelona, Spain

Salles propres et environnements apparentés
23.05.2012, Neuchâtel (CH), FSRM

Electromagnetic Compatibility of Integrated Circuits
01.06.2012, Neuchâtel, Switzerland

RF MEMS and NEMS
19.06.2012, Lausanne, Switzerland

Microsystems in Biomedical Engineering and Medical Products
25.06.2012 - 26.06.2012, Neuchâtel, Switzerland

Microfabrication Processes
24.09.2012 - 25.09.2021, Zürich, Technopark

Polymer Microfabrication (1 day)
08.10.2012, Neuchâtel, Switzerland

Surface Analysis with AFM
18.10.2012, Zürich, Technopark

Hermetic Packaging Design of MEMS
08.11.2012 - 09.11.2012, Neuchâtel, Switzerland

Laser Micromachining
12.11.2012, Neuchâtel, Switzerland

Optical Microsystems
22.11.2012, Zürich, Technopark

Micro-Optics
10.12.2012 - 11.12.2012, Zürich, Technopark

Basic Introduction to CMOS Image Sensors
13.12.2012 - 14.12.2012, Delft, The Netherlands

CAE Nano Microtechnology
  »  This course is currently not scheduled. Please contact us if you are interested.

Cantilever based Sensors for Nanoscience
  »  This course is currently not scheduled. Please contact us if you are interested.

Carbon Nanostructures with Manifold Applications
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique : Techniques de caractérisation de surfaces et couches minces
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique : Techniques de microstructuration (Partie I)
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique : Techniques de microstructuration (Partie II)
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique : Technologies de dépôt des couches minces et fonctionnalisation des surfaces (Partie I)
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique:Technologies de dépôt des couches minces et fonctionnalisation des surfaces (Partie II)
  »  This course is currently not scheduled. Please contact us if you are interested.

Glass Microfabrication
  »  This course is currently not scheduled. Please contact us if you are interested.

How X-Rays can support the development of MEMS
  »  This course is currently not scheduled. Please contact us if you are interested.

Micro Assembly using Surface Tension
  »  This course is currently not scheduled. Please contact us if you are interested.

Micro et Nano technologies pour les PME
  »  This course is currently not scheduled. Please contact us if you are interested.

Microfluidic Application Platforms
  »  This course is currently not scheduled. Please contact us if you are interested.

Microfluidics: Pipetting, Dispensing and Microarrays
  »  This course is currently not scheduled. Please contact us if you are interested.

Micropositioning
  »  This course is currently not scheduled. Please contact us if you are interested.

Nano-engineering
  »  This course is currently not scheduled. Please contact us if you are interested.

Nano-scale imaging based on statistical data analysis
  »  This course is currently not scheduled. Please contact us if you are interested.

NanoTera Summerschool: Micro-Nano for Large Distributed Systems
  »  This course is currently not scheduled. Please contact us if you are interested.

Next-generation lithography with focused electron beams
  »  This course is currently not scheduled. Please contact us if you are interested.

Photon Detection and Counting Techniques
  »  This course is currently not scheduled. Please contact us if you are interested.

Fabrication and Microfabrication Processes

Materialbearbeitung mit Laser
21.03.2012, Dübendorf EMPA Akademie

Le polissage
29.03.2012, Neuchâtel (CH), FSRM

Wafer Bonding
29.03.2012 - 30.03.2012, AML at Didcot near Oxford, England

Polymer Microfabrication (2 days)
17.04.2012 - 18.04.2012, Karlsruhe, Germany

Microfabrication Processes
24.09.2012 - 25.09.2021, Zürich, Technopark

Polymer Microfabrication (1 day)
08.10.2012, Neuchâtel, Switzerland

Laser Micromachining
12.11.2012, Neuchâtel, Switzerland

Cours pratique : Techniques de caractérisation de surfaces et couches minces
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique : Techniques de microstructuration (Partie I)
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique : Techniques de microstructuration (Partie II)
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique : Technologies de dépôt des couches minces et fonctionnalisation des surfaces (Partie I)
  »  This course is currently not scheduled. Please contact us if you are interested.

Cours pratique:Technologies de dépôt des couches minces et fonctionnalisation des surfaces (Partie II)
  »  This course is currently not scheduled. Please contact us if you are interested.

Die Wärmebehandlung, ein „Werkzeug“ zur gezielten Einstellung von Eigenschaften
  »  This course is currently not scheduled. Please contact us if you are interested.

Glass Microfabrication
  »  This course is currently not scheduled. Please contact us if you are interested.

Introduction à la construction mécanique de précision
  »  This course is currently not scheduled. Please contact us if you are interested.

Le traitement thermique, un outil de fabrication
  »  This course is currently not scheduled. Please contact us if you are interested.

Les bases de l’injection plastique
  »  This course is currently not scheduled. Please contact us if you are interested.

Les lasers Nd:YAG dans l'industrie
  »  This course is currently not scheduled. Please contact us if you are interested.

Les techniques CIM et MIM (Ceramic Injection Molding et Metal Injection Molding)
  »  This course is currently not scheduled. Please contact us if you are interested.

Les technologies avancées pour le prototypage et l'outillage rapides
  »  This course is currently not scheduled. Please contact us if you are interested.

Micro-usinage par gravure plasma
  »  This course is currently not scheduled. Please contact us if you are interested.

Usinage Grande Vitesse (UGV) et ses applications dans l'industrie
  »  This course is currently not scheduled. Please contact us if you are interested.

Usinages spéciaux (non conventionnels ou récents) : bases technologiques et applications pratiques
  »  This course is currently not scheduled. Please contact us if you are interested.

Measurements / Sensors and Actuators

Maîtrise de la métrologie dimensionnelle
21.02.2012 - 22.02.2012, Neuchâtel (CH), FSRM

Capteurs de pression et accéléromètres
  »  This course is currently not scheduled. Please contact us if you are interested.

Critères de choix des capteurs et des appareils de mesure
  »  This course is currently not scheduled. Please contact us if you are interested.

Les systèmes de vision dans le contrôle de qualité
  »  This course is currently not scheduled. Please contact us if you are interested.

Mesures sans contact de dimensions et de mouvements
  »  This course is currently not scheduled. Please contact us if you are interested.

Micropositioning
  »  This course is currently not scheduled. Please contact us if you are interested.

Medical Devices

Salles propres et environnements apparentés
23.05.2012, Neuchâtel (CH), FSRM

Matériaux allergènes
29.05.2012, Neuchâtel (CH), FSRM

Techniques de stérilisation de matériel médical
12.06.2012, Neuchâtel (CH), FSRM

Qualification et validation de processus
19.06.2012, Neuchâtel (CH), FSRM

Microsystems in Biomedical Engineering and Medical Products
25.06.2012 - 26.06.2012, Neuchâtel, Switzerland

"Labeling" pour dispositifs médicaux
  »  This course is currently not scheduled. Please contact us if you are interested.

Biocompatibilité des matériaux implantés
  »  This course is currently not scheduled. Please contact us if you are interested.

Sous-traitance médicale: les exigences qualité
  »  This course is currently not scheduled. Please contact us if you are interested.

Traitement des incidents et surveillance du marché pour les dispositifs médicaux
  »  This course is currently not scheduled. Please contact us if you are interested.

Materials

Smart Materials in Robotics and Microtechnology
12.03.2012 - 13.03.2012, Lausanne, Switzerland

Aluminiumlegierungen
28.03.2012, Dübendorf, EMPA Akademie

Traitements tribologiques de surfaces
02.05.2012, Neuchâtel (CH), FSRM

Alliages d'aluminium
04.05.2012, Neuchâtel (CH), FSRM

Anodisation : techniques, applications et nouveautés
  »  This course is currently not scheduled. Please contact us if you are interested.

Céramique high-tech - avantages et limites
  »  This course is currently not scheduled. Please contact us if you are interested.

Die Welt der Stähle
  »  This course is currently not scheduled. Please contact us if you are interested.

Elektrochemische Charakterisierung und Korrosion
  »  This course is currently not scheduled. Please contact us if you are interested.

La métallurgie des poudres : une ancienne technologie pour réaliser des nouveaux matériaux
  »  This course is currently not scheduled. Please contact us if you are interested.

Les aciers
  »  This course is currently not scheduled. Please contact us if you are interested.

Les bases de l’injection plastique
  »  This course is currently not scheduled. Please contact us if you are interested.

Les bases technologiques de la corrosion des métaux
  »  This course is currently not scheduled. Please contact us if you are interested.

Les matériaux composites
  »  This course is currently not scheduled. Please contact us if you are interested.

Les matières synthétiques, défis et opportunités dans leurs applications
  »  This course is currently not scheduled. Please contact us if you are interested.

Les techniques CIM et MIM (Ceramic Injection Molding et Metal Injection Molding)
  »  This course is currently not scheduled. Please contact us if you are interested.

Matériaux Actifs - Applications en Robotique et Microtechniques
  »  This course is currently not scheduled. Please contact us if you are interested.

Metallische Gläser: Eigenschaften, Technologien, Anwendungen
  »  This course is currently not scheduled. Please contact us if you are interested.

Parylène : une solution innovante pour le packaging
  »  This course is currently not scheduled. Please contact us if you are interested.

Polymères techniques : Evaluation et sélection
  »  This course is currently not scheduled. Please contact us if you are interested.

Polymerwerkstoffe für technische Anwendungen : Bewertung und Auswahl
  »  This course is currently not scheduled. Please contact us if you are interested.

Verres métalliques ou métaux amorphes : propriétés et applications
  »  This course is currently not scheduled. Please contact us if you are interested.

Production

Optimisation du niveau de stock
06.03.2012, Neuchâtel (CH), FSRM

Le polissage
29.03.2012, Neuchâtel (CH), FSRM

Nettoyage et dégraissage de pièces dans l'industrie
17.04.2012, Neuchâtel (CH), FSRM

Optimisation des flux industriels et planification
16.05.2012, Neuchâtel (CH), FSRM

Salles propres et environnements apparentés
23.05.2012, Neuchâtel (CH), FSRM

TRS Taux de Rendement Synthétique
24.05.2012, Neuchâtel (CH), FSRM

Organisations logistiques client/fournisseurs
14.06.2012, Neuchâtel (CH), FSRM

Aménagement ergonomique du poste de travail
  »  This course is currently not scheduled. Please contact us if you are interested.

Collage industriel
  »  This course is currently not scheduled. Please contact us if you are interested.

Comment mettre la GPAO au service de la R & D ?
  »  This course is currently not scheduled. Please contact us if you are interested.

Contrôle de pièces de haute précision
  »  This course is currently not scheduled. Please contact us if you are interested.

Ethernet en milieu industriel
  »  This course is currently not scheduled. Please contact us if you are interested.

GPAO Open Source
  »  This course is currently not scheduled. Please contact us if you are interested.

La théorie des contraintes
Une approche d’optimisation des performances
  »  This course is currently not scheduled. Please contact us if you are interested.

Les systèmes de vision dans le contrôle de qualité
  »  This course is currently not scheduled. Please contact us if you are interested.

Löten
  »  This course is currently not scheduled. Please contact us if you are interested.

Ordonnancement de la production
  »  This course is currently not scheduled. Please contact us if you are interested.

Pratique et économie de la purification de l'eau dans l'industrie
  »  This course is currently not scheduled. Please contact us if you are interested.

Robotique industrielle
  »  This course is currently not scheduled. Please contact us if you are interested.

Soudure sans plomb
  »  This course is currently not scheduled. Please contact us if you are interested.

Taxe CO2 et gestion de l'énergie dans l'industrie
  »  This course is currently not scheduled. Please contact us if you are interested.